Step 1: Open the box and put the LiPo Battery in the Bottom Part of the Circuit.
Step 2: Take the Upper Circuit and connect the 3 Steel Mounts.
Step 3: Connect the White Cable from Upper Circuit to the Bottom Circuit in the middle.
Step 4: Connect the Steel Mounts with the Bottom Mount.
Step 5: Add the Ultrasonic Sensor to the top, looking in the forward direction.
[Important Reminder: Please do not connect the Ultrasonic sensor facing backwards as that might ruin it.]
Step 6: See if everything looks like the picture below:
Step 7: Turn on the Switch at the back of the bottom Circuit Mount.
Step 8: You’re ready to program Bell!
